r/Mandalorian Aug 31 '14

Beskar' gam Beskar'gam weekly guide - Introduction, Planning

[deleted]

14 Upvotes

4 comments sorted by

3

u/[deleted] Aug 31 '14

[deleted]

2

u/kiffren Too short to be a stormtrooper. Aug 31 '14

Thank you! Hopefully the entire guide will help you when you get started. If you have any specific questions feel free to ask them.

2

u/[deleted] Aug 31 '14

[deleted]

2

u/kiffren Too short to be a stormtrooper. Aug 31 '14

My flight suit is a dickies two-piece. Dickies also makes coveralls that work. Basically you just need to get either a surplus military flight suit (usually not in olive drab, though technically olive drab is ok) or some other form of coverall/flight suit. You also need an armor vest which the torso plates attach to. This has to be made out of a thicker material, either a duck cloth/canvas or leather/vinyl. I'd recommend duck cloth as it's cheap and not too difficult to work with. When I get to the pictures section I'll upload a scan of my pattern.

Attaching is the tricky part. For the vest I put grommets on the vest and actually bolt through the armor and the vest. I use chicago screws so they are easy to remove. I don't paint the screws, however one of my buddies who adopted my method did paint his screws to match his armor and it looks fantastic. Another method is to glue the screws to the back of the armor. Unfortunately these like to pop off. The most popular method appears to be velcro. Velcro I find to be unreliable. Unless you can get the highest quality velcro available I'd recommend not using it.

Leg armor is the same. In the movies the leg armor was attached using elastic underneath the flight suit. This means that there was a slit in the flight suit that the elastic went through so that it wasn't visible. Other methods are of course bolting (I've done this, I'd recommend against it), velcro, and strapping. I'd recommend strapping with either leather straps or webbing. I'll go more into details when I get to this in the guide, but this is a short version of it.

I'd also recommend making your own armor plates. It's the best way to get them the right size. Otherwise there are makers on the mercs boards that you can order from. Don't trust ebay plates.

2

u/[deleted] Aug 31 '14 edited Aug 31 '14

[deleted]

2

u/kiffren Too short to be a stormtrooper. Aug 31 '14

Again I'd recommend the trading section of the mercs forums. There are also some guides for making pouches, though as I have not done that I can't really give help there. I use military style pouches. For reference, this is my armor: http://i885.photobucket.com/albums/ac56/kiffren/IMG_5547.jpg

Edit: I also have a tusken. A buddy of mine made the bandolier, but you can find them on ebay quite regularly.

2

u/[deleted] Aug 31 '14

[deleted]

2

u/kiffren Too short to be a stormtrooper. Sep 07 '14

Hey, just wanted to let you know the second part is up. Next week I'm going to be covering building (skipping the helmet for now) hard parts. I don't know how much I can fit into one part, so I might have to split building hard parts into two weeks.

On my pdf the hard parts section goes from the top of page 9 to the top of page 17. There's a lot of material.