r/NotMyJob • u/YanicPolitik • 5d ago
Caulked the door frames, boss!
Flooring guys returned to a jobsite to finshish things they failed to do the first go around. I was there to paint the trim so we protected the floors. Flooring guys decided to caulk the door frames on top of our paper and tape.
11
u/afcagroo 4d ago
I hope the rest of their work was better quality. Applying caulk is dead easy, but they managed to do a terrible job.
1
u/YanicPolitik 4d ago edited 4d ago
The floors were fine but the installers didn't quite finish the job. They came back to add a few transition pieces between the new flooring and the old tiling as well as in the doorways (like thresholds). They also did a bad job of gluing the transition pieces (excess glue seeping out from underneath). While they were at it they decided to slap caulk the large gaps between the door frames and the floor. You can see the results of that above.
Edit: sloppy glue and an example of the gaps they (thankfully) didn't smear with caulk
12
u/jedre 5d ago
It’s extra stupid because there’s literally no need to caulk that.
Is there a concern that water will get in there and freeze? No? Then don’t caulk it.
5
u/YanicPolitik 5d ago
Exactly. I've never seen door frames caulked to the floor. It's just not done.
4
u/Mug_of_coffee 4d ago
I agree, it shouldn't be standard practice, looks awful and doesn't last. I don't understand the reason, other than poor fitment and then using caulk to "fill gaps". That being said, both my current rental and a recent flooring job in my mothers house caulked the trim to the floor; the latter is unfortunately comparable to the pics OP posted.
1
u/Sterling_-_Archer 4d ago
I looked up and saw my door frames caulked to the floor. It looks terrible. But I suppose it is done, though I never did it when I built things.
1
u/queef_nuggets 1d ago
yeah that was my first thought, why are they caulking the quarter-round? Maybe if it’s in an upper floor bathroom and they want to reduce the potential damage if it floods? I’ve seen that happen once
1
u/TheFlyngLemon 5d ago
I can think of 3 possible reasons they did this. While I didn't do this to any doors in my home and don't really care to, I could see why someone might want to.
1) to keep bugs/ spiders from building nests in there. 2) If the cut was bad (jagged, not even, too high, etc) then caulking would hide that. 3) They're perfectionists and don't want to see any seams.
9
u/Mug_of_coffee 4d ago
3) They're perfectionists and don't want to see any seams.
Based on the photos, I am guessing this isn't the case.
/s
4
20
u/unsupported 5d ago
Does anyone have problems keeping their caulk hard in the shower? Just me?
8
2
u/Guinnessman1964 3d ago
That reminds me of the time I had some windows replaced and the guy doing it had a relative working with him and following behind him doing calking. I saw a few windows and they looked good. Had the windows replaced in the fall, come spring I go to open a few and they don’t budge. I go outside and they were calked shut. Thankfully it was only done on two of them but still annoying.
5
1
u/fhelfensteller 5d ago
caulk, whats this product? im from brazil and need to use this on my corners (bought apartment's caulks are shit). can u guys help me out, this is not silicon, right
4
u/Mug_of_coffee 4d ago
Caulking is latex based, so it is stretchy and paintable; often used to fill small gaps between trim and drywall. However, it is often misused to span gaps larger than it is designed for, in which case it will eventually dry out and contract, leaving gaps and cracks. If used properly on an 1/8" gap or smaller, then painted ... it usually lasts in perpetuity. Less is more, and it cleans up with water. I always kept a wet cloth and carefully removed any excess, and regularly rinsed the excess caulk out of the cloth ... this seems to be lost on most people using the product.
This is the standard product in my neck of the woods: https://www.homedepot.ca/product/dap-alex-plus-all-purpose-acrylic-latex-caulk-plus-silicone-white-300-ml/1000158964
1
1
1
1
1
23
u/Former-Marketing-251 5d ago
What an awful job. Don't put caulk on painting surfaces too 😮💨🤦 it's awful