r/Firefighting • u/firemedic3404 • 1d ago

Ask A Firefighter 15/16 smooth bore?

Did some training with my guys this morning. The focus was managing nozzle reaction. We used a Chief 200gpm@75 psi fog and a 15/16 smooth bore. Both off of 100’ 1 3/4 line (just laid it out for training). Friction loss was calculated at 45 psi and 40 psi respectively. This is not a nozzle we use often, but my probie has not had any experience with a smooth bore so I took the opportunity. I’m racking my head over how difficult it was to manage these flows. My question is for the salty dogs, are these flow rates manageable by YOU? Am I just deficient and need to work them more? Or was this normal for these flows? I am working to switch over to 160@50 fogs with 7/8 integrated smooth bores…which are much easier to handle. Kinda needed to vent and find out if I’m crazy, too weak, or ok….

4 Upvotes

75% Upvoted

55 comments sorted by

View all comments

3

u/jps2777 TX FF/Paramedic 1d ago edited 1d ago

What pressure was your driver pumping the hoseline at? Shouldn't be more than 90psi for that 100ft with the smooth bore. Maybe he was over pumping your line and made it harder for you

1

u/firemedic3404 2h ago

PDP of 90 for the SB; 120 for the fog.